Call 08048106689 86% Response Rate

our range

Fully Automatic PET Blow Moulding Machine

We are a leading Manufacturer of 2400bph fully automatic pet blow moulding machine, 3600bph fully automatic stretch blow moulding machine and 4400bph fully automatic pet stretch blow moulding machine from Chennai, India.
  • 2400BPH Fully Automatic PET Blow Moulding Machine
  • 2400BPH Fully Automatic PET Blow Moulding Machine
  • 2400BPH Fully Automatic PET Blow Moulding Machine
  • 2400BPH Fully Automatic PET Blow Moulding Machine
2400BPH Fully Automatic PET Blow Moulding Machine

2400BPH Fully Automatic PET Blow Moulding Machine

Rs 13.95 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

No of Cavities2
Blowing Capacity100ml - 2000ml
Types of Bottles BlowingWater, Juice, Soda & Oil
Production Capacity (Bottles/Hour)2400BPH for 1000ml
Maximum Container Volume (Capacity of Bottle)2000ml
Max. Neck Diameter28 - 30mm
Max. Diameter of Bottle102mm
Max. Height of the Bottle340mm

OTHER TECHNICAL SPECIFICATION:

Machine Model

DM-BKAE2

Types of Preform

Alaska & PCO

Bottle Outlet

Auto Drop

Center Distance for Cavities

136mm

Pre-heating System

Near Infrared

No of Heaters

8 Nos

Heater Capacity

2000 Watts

Size of the Mould (Thickness x width)

120mm x 125mm (Each)

Blowing Pressure

20Bar

Working Pressure

6Bar

Machine Connected Power

7KW, 3 Phase

Machine Power Consumption

5KWH (Units)

Opening Stroke

90 degree (Book Type)

Required Compressor Capacity (High Pressure)

20HP/25Bar/54CFM

Required Air Dryer Capacity

60CFM/40Bar

Required Water Chiller Capacity

2.5Ton@10 degree C

MACHINE FEATURES:

Our machine has simple innovative design and ultimate energy saving. It is engineered for efficiency and maximum production speed.

  • Very Low Power Infrared Conveyorised Preheating System for Power Saving.
  • Blowing Toggle System for Easy and Lesser Mould Changing Time.
  •  Incremental Heater Settings by 1% to 199% for Accurate Pre-form Heat Setting.
  • Air & Water Lines are Push & Pull System for Easy Maintenance.
  • Long Life PU Seal Cylinders and Higher Accuracy Valves used for Low Pressure Control System.
  • IP67 Grade P & F Sensors used for Higher Accuracy & Speed.
  • 32 Bit PLC Based System with 7” Multi colour HMI Unit used for Easy Man Machine Interfacing and Higher Machine Performance.
  • Multiple Products Like Mineral Water Bottles, Carbonated Soft Drinks Bottles, Hot Fill Juice Bottles at Low Investment. 
  • Machine Can Store 20 Mould Recipe Parameters so it helps to reduce Mould Changing Time.
  • Very High Productivity with Very Low Power Consumption.
  • Easy operation & Easy maintenance.
  • Production Display with Man Machine Interfacing Facility. The multicolor Touch screen Display is Used to Graphically view all the parameters.
  • Compact Structure and low maintenance cost.
OUR VALUABLE PARTNERS:
  • Electrical System - Schneider Electric -  France
  • Controllers - Inovance - Taiwan
  • Pneumatic Items – Festo - Germany
  • Motors & Gear Boxes - Transtech - Taiwan
  • Sensors - P & F - Germany
  • SSRs - Carllo Gavazzi - Italy
  • Bearings - NTN - Japan
  • Cables - Lapp Cables - Germany

Overall this machine is designed for safe, hygienic, high quality PET bottles with Cost effective production at very high speed



Additional Information:

  • Item Code: DM-BKAE2
  • Production Capacity: 30 Machines Per Month
  • Delivery Time: 1 Week

View Complete details

get quoterequest a call back
  • 3600BPH Fully Automatic Stretch Blow Moulding Machine
  • 3600BPH Fully Automatic Stretch Blow Moulding Machine
  • 3600BPH Fully Automatic Stretch Blow Moulding Machine
  • 3600BPH Fully Automatic Stretch Blow Moulding Machine
3600BPH Fully Automatic Stretch Blow Moulding Machine

3600BPH Fully Automatic Stretch Blow Moulding Machine

Rs 16.95 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Country of OriginMade in India
No of Cavities3
Blowing Capacity100ml - 1000ml
Types of Bottles BlowingWater, Juice, Soda & Oil
Production Capacity (Bottles/Hour)3600BPH for 1000ml
Maximum Container Volume (Capacity of Bottle)1000ml
Max. Neck Diameter28 - 30mm
Max. Diameter of Bottle82mm

OTHER TECHNICAL SPECIFICATION:

Machine Model

DM-BKAE3

Types of Preform

Alaska & PCO

Bottle Outlet

Auto Drop

Center Distance for Cavities

95mm

Pre-heating System

Near Infrared

No of Heaters

12 Nos

Heater Capacity

1500 Watts

Size of the Mould (Thickness x width)

120mm x 310mm 

Blowing Pressure

20Bar

Working Pressure

6Bar

Machine Connected Power

8KW, 3 Phase

Machine Power Consumption

6KWH (Units)

Opening Stroke

90 degree (Book Type)

Required Compressor Capacity (High Pressure)

25HP/25Bar/72CFM

Required Air Dryer Capacity

100CFM/40Bar

Required Water Chiller Capacity

3.5Ton@10 degree C

MACHINE FEATURES:

Our machine has simple innovative design and ultimate energy saving. It is engineered for efficiency and maximum production speed.

  • Very Low Power Infrared Conveyorised Preheating System for Power Saving.
  • Blowing Toggle System for Easy and Lesser Mould Changing Time.
  •  Incremental Heater Settings by 1% to 199% for Accurate Pre-form Heat Setting.
  • Air & Water Lines are Push & Pull System for Easy Maintenance.
  • Long Life PU Seal Cylinders and Higher Accuracy Valves used for Low Pressure Control System.
  • IP67 Grade P & F Sensors used for Higher Accuracy & Speed.
  • 32 Bit PLC Based System with 7” Multi colour HMI Unit used for Easy Man Machine Interfacing and Higher Machine Performance.
  • Multiple Products Like Mineral Water Bottles, Carbonated Soft Drinks Bottles, Hot Fill Juice Bottles at Low Investment. 
  • Machine Can Store 20 Mould Recipe Parameters so it helps to reduce Mould Changing Time.
  • Very High Productivity with Very Low Power Consumption.
  • Easy operation & Easy maintenance.
  • Production Display with Man Machine Interfacing Facility. The multicolor Touch screen Display is Used to Graphically view all the parameters.
  • Compact Structure and low maintenance cost.
OUR VALUABLE PARTNERS:
  • Electrical System - Schneider Electric -  France
  • Controllers - Inovance - Taiwan
  • Pneumatic Items – Festo - Germany
  • Motors & Gear Boxes - Transtech - Taiwan
  • Sensors - P & F - Germany
  • SSRs - Carllo Gavazzi - Italy
  • Bearings - NTN - Japan
  • Cables - Lapp Cables - Germany

Overall this machine is designed for safe, hygienic, high quality PET bottles with Cost effective production at very high speed



Additional Information:

  • Item Code: DM-BKAE3
  • Production Capacity: 30 Machines Per Month
  • Delivery Time: 1 week

View Complete details

get quoterequest a call back
  • 4400BPH Fully Automatic PET Stretch Blow Moulding Machine
  • 4400BPH Fully Automatic PET Stretch Blow Moulding Machine
4400BPH Fully Automatic PET Stretch Blow Moulding Machine

4400BPH Fully Automatic PET Stretch Blow Moulding Machine

Rs 20.95 Lakh  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

No of Cavities4
Blowing Capacity100ml - 500ml
Types of Bottles BlowingWater, Juice, Soda & Oil
Production Capacity (Bottles/Hour)4800BPH for 500ml
Maximum Container Volume (Capacity of Bottle)500ml
Max. Neck Diameter28 - 30mm
Max. Diameter of Bottle65mm
Max. Height of the Bottle210mm

OTHER TECHNICAL SPECIFICATION:

Machine Model

DM-BKAE4

Types of Preform

Alaska & PCO

Bottle Outlet

Auto Drop

Center Distance for Cavities

76mm

Pre-heating System

Near Infrared

No of Heaters

10 Nos

Heater Capacity

2000 Watts

Size of the Mould (Width x Thickness)

120mm x 330mm (Each)

Blowing Pressure

20Bar

Working Pressure

6Bar

Machine Connected Power

9KW, 3 Phase

Machine Power Consumption

6.5KWH (Units)

Opening Stroke

90 degree (Book Type)

Required Compressor Capacity (High Pressure)

25HP/25Bar/72CFM

Required Air Dryer Capacity

100CFM/40Bar

Required Water Chiller Capacity

3.5Ton@10 degree C

MACHINE FEATURES:

Our machine has simple innovative design and ultimate energy saving. It is engineered for efficiency and maximum production speed.

  • Very Low Power Infrared Conveyorised Preheating System for Power Saving.
  • Blowing Toggle System for Easy and Lesser Mould Changing Time.
  •  Incremental Heater Settings by 1% to 199% for Accurate Pre-form Heat Setting.
  • Air & Water Lines are Push & Pull System for Easy Maintenance.
  • Long Life PU Seal Cylinders and Higher Accuracy Valves used for Low Pressure Control System.
  • IP67 Grade P & F Sensors used for Higher Accuracy & Speed.
  • 32 Bit PLC Based System with 7” Multi colour HMI Unit used for Easy Man Machine Interfacing and Higher Machine Performance.
  • Multiple Products Like Mineral Water Bottles, Carbonated Soft Drinks Bottles, Hot Fill Juice Bottles at Low Investment. 
  • Machine Can Store 20 Mould Recipe Parameters so it helps to reduce Mould Changing Time.
  • Very High Productivity with Very Low Power Consumption.
  • Easy operation & Easy maintenance.
  • Production Display with Man Machine Interfacing Facility. The multicolor Touch screen Display is Used to Graphically view all the parameters.
  • Compact Structure and low maintenance cost.
OUR VALUABLE PARTNERS:
  • Electrical System - Schneider Electric -  France
  • Controllers - Inovance - Taiwan
  • Pneumatic Items – Festo - Germany
  • Motors & Gear Boxes - Transtech - Taiwan
  • Sensors - P & F - Germany
  • SSRs - Carllo Gavazzi - Italy
  • Bearings - NTN - Japan
  • Cables - Lapp Cables - Germany

Overall this machine is designed for safe, hygienic, high quality PET bottles with Cost effective production at very high speed



Additional Information:

  • Item Code: DM-BKAE4
  • Production Capacity: 30 Machines Per Month
  • Delivery Time: 45 Days

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES